Electronic Parts
Showing 13–24 of 24 results
-
Connectors, Electronic Parts, Power Supply, Robots Parts, Wires, Wires & Cables, Wires & Cables
DC Power Jack Male Connector Wired Black
-50%Connectors, Electronic Parts, Power Supply, Robots Parts, Wires, Wires & Cables, Wires & CablesDC Power Jack Male Connector Wired Black
DC Power Jack Male Connector Wired Black are best to use in various electronic projects where you need to connect disconnect the DC power supply to your circuit frequently. The wire is flexible about 8 inches long. One side of the wire has DC Power Male Jack connector covered with soft insulated material and the other corner has open wire that you can directly solder to your power supply.
SKU: EP-WIRE-DC-MJ-8 -
Connectors, Electronic Parts, Robots Parts
Female Headers – 2.54mm Pitch – 40 Pins
Female Headers – 2.54mm Pitch – 40 Pins is a female header use to mount directly on your pcb. It has a 2.54mm pitch that can be directly use in General PCB. It can also be connected with your arduino boards like Arduino UNO and Arduino Mega and Arduino Nano. One side of the pins are male pins and the other side is female connector. You can cut this header short as per your requirement.
SKU: EP-CO-HED-F40P-254 -
Connectors, Electronic Parts, Robots Parts
Male Headers – 2.54mm Pitch – 40 Pins
Male Headers – 2.54mm Pitch – 40 Pins is a header use to mount directly on your pcb. It has a 2.54mm pitch that can be directly use in General PCB. It can also be connected with your arduino boards like Arduino UNO and Arduino Mega and Arduino Nano. Both corners of the pins are male pins. You can cut it short as per your requirement.
SKU: EP-CO-HED-M40P-254 -
Connectors, Electronic Parts, Robots Parts
Male Headers Right Angle – 2.54mm Pitch – 40 Pins
Male Headers Right Angle – 2.54mm Pitch – 40 Pins is a 90 degree angle bent header use to mount directly on your pcb. It has a 2.54mm pitch that can be directly use in General PCB. It can also be connected with your arduino boards like Arduino UNO and Arduino Mega and Arduino Nano. Both corners of the pins are male pins that is bent at 90 degree angle. You can cut this header short as per your requirement.
SKU: EP-CO-HED-MR40P-254 -
Electronic Parts, Motors, Parts, Robots Parts, Sensors & Modules
Mini DC Toy Motor
Mini DC Toy Motor is a small motor that can be used in various small toys and electronic projects. Mini DC Toy Motor works on an operating voltage of 3V to 6V. It can also be operated using 2 AA batteries or 5V USB power supply.
SKU: RP-MOTOR-MDTM -
Electronic Parts, Motors, Parts, Robots Parts, Sensors & Modules
Mini DC Vibration Motor with Wire
-39%Electronic Parts, Motors, Parts, Robots Parts, Sensors & ModulesMini DC Vibration Motor with Wire
Mini DC Vibration Motor with Wire is a small yet highly powerful DC motor works on 1.5v to 5v DC voltage. It can be used with a variety of electronic creative projects such as toys, massagers, pagers, various devices, mobile phones etc.
SKU: RP-MOTOR-VIB -
Connectors, Electronic Parts, Robots Parts
Screw Terminals – 2.54mm Pitch 2 Pins
Screw Terminals – 2.54mm Pitch 2 Pins is a tiny and pcb mounted terminal block. It can be soldered directly to the PCB and is used to connect wires tied by screws. This terminal block includes screws to hold the wires in place. It can keep wires from 14 to 22 AWG. The best thing about this connector is that you can interconnect these connectors to build multiple connectors such as 4 pins,6 pins,8 pins,10 pins,12 pins and so on.
SKU: EP-CO-PCB-2P-2.54 -
Connectors, Electronic Parts, Robots Parts
Screw Terminals – 5.08mm Pitch 2 Pins
Screw Terminals – 5.08mm Pitch 2 Pins is a small pcb mounted terminal block. It can be soldered directly to the PCB and is used to connect wires tied by its screws. This terminal block includes screws to hold the wires in place. It can hold the wires from 12 to 22 AWG. The best thing about this connector is that you can interconnect these connectors to build multiple connectors such as 4 pins,6 pins,8 pins,10 pins,12 pins and so on.
SKU: EP-CO-PCB-2P-5.08 -
Electronic Parts, Parts, Robots Parts, Sensors & Modules, Wires, Wires & Cables
USB A To USB B Cable for Arduino – Blue Color
-50%Electronic Parts, Parts, Robots Parts, Sensors & Modules, Wires, Wires & CablesUSB A To USB B Cable for Arduino – Blue Color
USB A To USB B Cable for Arduino – Blue Color is a High Quality USB Cable to use with Arduino Boards like Arduino UNO and Arduino Mega. The wire is about 12 inches (1 Feet Approx) long. The one side of the wire has USB A type connector and the other corner has USB B type connector.
SKU: EP-WIRE-USB-A-B